skip to Main Content

TimeSavers distributes dock levelers from leading manufacturers such as Pioneer and Vestil. The different types of dock levelers allows for either a fully automated system or one with an attendant, and they all come with safety features built in.

We are a major authorized distributor for over a hundred material handling manufacturers. To get more information on our entire dock levelers catalog, as well as find the exact solution you are looking for, please contact us directly.

Hey! Interested in this product?

We sell Dock Levelers for the industry leading manufacturers. Designed for many different industries and applications.

A Mechanical Pit Leveler is a fully automatic loading ramp where there is no dock attendant needed. It consists of a lift by-pass for safety and toe guards on each side. As the truck backs against the twin actuating arms, or bumpers, it pushes the carriage back. Both the dock and trailer must be raised for this process to work. As the carriage goes back the deck goes up. When the carriage bumpers contact the dock, the deck floats down to rest on the trailer. Once the truck pulls out, the deck then returns to level supported position automatically.


  • 55,000 pound minimum yield steel tread plate
  • Full length deck support beams fully welded to full width header plate
  • Positive Hold Down device compensates for vertical float of trailer
  • Conveniently located pull chain provides easy activation of the deck and lip
  • Direct extension spring provides easy walk down; no moving parts to wear out
  • Standard working range toe guards and grease fittings on lip hinge
  • Safety legs automatically provide multiple below dock safety points
  • Molded bumpers protect the dock face and leveler from truck impact damage
  • Fixed rear hinge

Truck Actuated Dock Leveler Features

  • 55,000 psi high strength checker plate deck
  • 12″ long lip (extends 6½” into truck)
  • Toeguards on each side
  • Service range of 12″ above through 8″ below dock
  • (2) Molded Bumpers; 5″W x 16″H x 2″D
  • Lift By-Pass for Safety

Capacity:  25000 – 35000 lbs

Weight:  2036 – 2830 lbs

Hydraulic Levelers create a cost effective path to migrate from mechanical to fully hydraulic pit levelers. The result is a product that can automate loading docks.


  • 55,000 lb. Minimum yield steel tread plate on the deck and lip
  • Structural “C” channel deck supports are fully welded to full width header plate
  • Push button electric hydraulic actuation
  • In-line safety stop prevents sudden fall of deck
  • Standard working range toe guards
  • Grease fittings on lip hinge
  • Molded bumpers, two per dock leveler
  • 16″ Lip projection – 12″ beyond bumpers
  • Deck to tilt 4″ from side to side to compensate for unlevel trucks
  • Cross traffic support and night lock security to be provided by lip stored in lip keepers
  • Standard maintenance strut
  • Standard 25,000; 30,000; 35,0000; 40,000; and 45,000 lb. dynamic capacities
  • Operating range of 12″ above to 12″ below deck
  • Leveler may be recycled with truck in position
  • Yieldable lip

Truck Scissor Dock Lifts have a pit or surface mount with an optional approach ramp. Engineered and designed for maximum safety and efficiency, the checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency safety velocity fuse if the line breaks. It also comes with an upper travel limit switch and overload relief valve. The push-button control is on a 20 foot long coil cord, and the pre-wired control box includes a magnetic starter and an overload fuse. High visibility safety yellow removable handrails with fixed toe boards are standard. Includes beveled toe-guards and electric toe-guards around the perimeter of the platform. An external 6.5 HP 460V, 3-phase, 60 Hz motor can be located up to 8 feet away from lift (weighs 300 pounds)

Safety Features:

The electric toe-guard is a patented feature essential to the safety of all personnel. The guard is made from L-shaped aluminum extrusion and hangs below the entire perimeter of the deck. If the Scissor Dock is being lowered while an object such as a person’s hand or foot is in its path, the guard will be triggered and electrically stop the table from lowering. Once the object is removed, the table will once again be operable; there is no need to reset the unit.

Capacity:  5000 – 12000 lbs

Platform Size:  48”x 96” – 96”x 144”

Lowered Height:  8” – 14”

Raised Height:  68” – 72”

Weight:  2856 – 7436 lbs


Thank you for your interest in TimeSavers Material Handling! Please submit your requirements and one of our representatives will contact you with the best options available.

Request Quote ×
Request Quote
Click-to-call 513-251-1500 We'd love to hear from you

Contact Us


Client Info