TimeSavers sells end effectors and attachments from the world’s leading manufacturers, including Caldwell and Peerless. There is a large selection of various styles available to work for many situations, depending on your company’s needs.
We are a major authorized distributor for over a hundred material handling manufacturers. This page shows a sampling of the end effectors and attachments that we provide. To get more information on our entire end effectors and attachments catalog, as well as find the exact solution you are looking for, please contact us directly.

Grabs
Features:
- Motorized leg drive maximizes the efficient handling of coils.
- Leg drive speed – 2.8” per second.
- Narrow aisle stacking maximizes coil storage floor space.
- Curved lifting pads for coil protection.
- High impact plastic toe rollers prevent lifter foot contact.
- Anti-clamp limit switch protects coil during closing of lifter.
- Heavy duty torque limiting drive protection during maximum open/closed conditions.
- Lockout limit switch prevents inadvertent leg opening during lift.
- Alloy steel pin bail.
- Easily replaceable slide wear guides.
- Design allows for easy maintenance access to drive components.
- Designed to operate on AC power supply.
- Field upgradeable to rotating style.
- Complies with ASME standards.
Options:
- Higher capacities
- Additional lengths
- Protective padding
- Parking stands
- Motorized leg drive
Capacity: 15 – 33 tons
Min Coil Width: 20 in.
Max Coil Width: 72 in.
Throat: 32.3 in.
Weight: 3440 – 4800 lbs
C-Hook Lifters
Features:
- High tensile alloy steel plate reduces physical size and weight.
- Counter balanced to hang level when empty.
- Inside radius on hooks avoid coil edge contact.
- Curved coil saddle is standard.
- Guide handles for ease of hook positioning.
- Handles a wide range of coil widths.
- Available with optional padding for additional coil protection.
- Complies with ASME standards.
- Recessed counterweight minimizes interference with equipment or other obstacles.
Capacity: 5 – 50 tons
Min Width: 24 – 48 in.
Max Width: 36 – 72 in.
Throat: 24 – 40
Length: 30 – 72
Depth: 5-5/16 – 13 in
Width: 4 – 6 in
Weight: 420 – 7470 lbs
Short Span Lifting Beam (Plate Style)
Features:
- This style of lifting beam is ideal for short span applications and can be utilized where headroom is limited.
- Supplied with a pair of shackles and one standard spread.
- Engineered and manufactured to ASME B30.20 & BTH-1 Design Category B Service Class 2.
Options:
- Additional lift points
- Higher capacities (supplied w/upper shackle)
- Additional lengths
- Upper shackle
- Upper shackle w/oblong link
- Hooks
Capacity: ¼ – 195 tons
Outside Spread: 1 – 3 feet
Headroom: 6.9 – 49.7 in.
Bail Height: .63 – 6.5 in.
Bail Opening Width: 2 – 10 in.
Bail Opening Height: 4 – 24 in.
Weight: 10 – 2100 lbs
Basket Sling Lifting Beam
Features:
- This style of lifting beam can be utilized where headroom is limited with slings in a basket hitch.
- Includes two sets of fixed hooks (3′ and 4′ beams have one set of hooks).
- Two standard lift points for load adjustment: outside lift point and inside lift point (1/2 the overall length).
- Engineered and manufactured to ASME B30.20 & BTH-I Design Category B Service Class 2.
Options:
- Additional lift points
- Higher capacity
- Additional lengths
- Low headroom bail
- Additional hooks
- Sling spacers
Capacity: ½ – 20 tons
Outside Spread: 3 – 30 ft.
Headroom: 9 – 31
Bail Height: .88 – 2.5
Bail Opening Width: 3 – 5
Bail Opening Height: 5 – 9
Weight: 53 – 5725 lbs
Bale Lifting Tong
Features:
- Lifts bales of paper, cotton, and other materials.
- Wide gripping surface for load stability.
- Includes Auto-Latch mechanism for one person operation.
- Complies with ASME standards.
Capacity: .5 & 1 ton
Bale Width: 36 & 48 in.
Unit Height: 52 & 56 in.
Pad Width: 18 in.
Pad Height: 9 in.
Weight: 280 & 300 lbs
Die Lifting Tongs
Features:
- Broad capacity range.
- Low headroom design.
- Painted safety red.
- Complies with ASME standards.
Capacity: 2000 – 3000 lbs
Weight: 29 – 86 lbs
Bar Tong Adjustable
Features:
- This style of adjustable diameter tong is ideal for lifting round bars, cast or steel pipe of various diameters.
- Can be supplied with optional replaceable urethane pads for additional load protection.
- The load must be balanced during the lift.
- Can be used in pairs attached to a lifting/spreader beam to handle longer loads.
- Engineered and manufactured to ASME B30.20 & BTH-1 Design Category B Service Class 2.
Options:
- Replaceable urethane pads
- Higher capacities available
Capacity: .5 & 1 tons
Bare Steel Min: 2.5 – 15
Bare Steel Max: 4 – 20
Headroom Min: 13 – 60
Headroom Max: 15 – 65
Bail Height: .63 – .97
Bail Opening Width: 1.69 – 2.28
Bail Opening Height: 1.69 – 2.28
Weight: 10 – 225 lbs
Heavy Duty Sheet Lifter
Features:
- Low headroom design for optimum lifting capabilities.
- One person operation minimizes handling cost.
- Self-locking worm gear drive for leg adjustment is standard.
- Easy adjustment for different sheet widths.
- Rack and pinion leg drive.
- Designed for ease of maintenance.
- Designed for greater sheet width range.
- Complies with ASME standards.
Options:
- Hand wheel lockout.
- Motorized leg adjustment.
- Chain-wheel leg adjustment.
- Extended length hand wheel leg adjustment.
- End chains with plate hooks (recommended for all widths 72” and greater).
- Extended grab shoe lengths available.
- Additional bundle clearance available (longer legs).
Capacity: 3 – 15 tons
Min. Bundle Width: 16 & 38 in.
Max. Bundle Width: 48 – 96 in.
Min. Aisle: 9 – 12 in.
Weight: 920 – 2030 lbs
Plate Lifter
Features:
- Rugged-chain rigging.
- Heavy duty plate hooks.
- Design allows for easier crane alignment.
- Steel spreader stabilizes two hooks.
- Complies with ASME standards.
Capacity: 5 & 10 tons
Max Plate Width: 96 in.
Weight: 185 & 320 lbs
Sheet Lifter Light Duty
Features:
- This style of lifter is designed to lift and carry smaller sizes of bundles, sheets and/or plates.
- Standard direct drive, self-locking, rack and pinion leg adjustment.
- Standard hand-wheel with slip clutch to prevent damage to gearboxes from over adjustment.
- Utilizes a sling style bail that adds stability and provides ease of maintenance on the gearbox and pinion gear assembly.
- Easily maintained low headroom design.
- Engineered and manufactured to ASME B30.20 & BTH-1 Design Category B Service Class 2.
Options:
- Chain wheel leg drive
- Extended hand wheel or chain wheel
- Extended shoe lengths
- Extended leg heights
- Load chains with plate hooks
Capacity: 1.5 – 5 tons
Bundle Width Min.: 12 – 20
Bundle Width Max.: 36 – 60
Headroom: 44 – 54
Weight: 507 – 755 lbs
Beam Web Clamp
The Beam Web Clamp is designed to positively grip the center web of the I-beam, allowing it to handle the full rated capacity along any direction from the lifting eye.The clamp secures to the web of the I-beam,while the throat of the clamp pinches the flange during side loading for positive contact during lifting or suspending applications.
Features:
- Designed to accommodate side load applications.
- Full rated capacity at any lifting angle.
- Low headroom design.
- Securely grips beam web and flange.
- Use for lifting or hanging.
- Complies with ASME B30.20 and BTH-1.
Capacity: 11000 – 22400 lbs
Weight: 76 & 82 lbs
Beam Grabs
Features:
- Heavy duty design.
- The grabs provide an efficient method for handling wide flange beam sections and plate girders.
- Clamps have a recessed base to accept studs welded to a beam’s surface.
- Beam grabs eliminate the need for slings or chokers.
- Use only for vertical lifting.
- For longer beams or girders, use units in pairs in conjunction with a spreader/lifting beam.
- Complies with ASME standards.
Capacity: 5 – 35 tons
Min Flange Thickness: .25 – 2.25
Max Flange Thickness: .25 – 4
Weight: 68 – 841 lbs
Girder Clamps
Features:
- Provides an efficient method for handling wide flange beam sections and plate girders.
- Screw-spindle design ensures positive grip.
- Simple design ensures minimum maintenance.
- Left-hand thread and right-hand thread screw spindle allows for rapid clamping and unclamping.
- Jaw opening adjusts to a wide range of beam types and flange widths.
- Use only for vertical lifting.
- Complies with ASME standards.
Capacity: 15 – 25 tons
Flange Width Min.: 6 in
Flange Width Max.: 24 in
Flange Thickness: 3 in
Weight: 234 – 342 lbs
Beam Tongs
Features:
- Tong provided with lifting shackle.
- Load must be balanced and controlled when lifting.
- Use only for vertical lifting.
- For added stability when handling longer loads, use in pairs with a spreader beam.
- Complies with ASME standards.
Capacity: 1 – 3 tons
Beam Width Min.: 5 – 7.5 in.
Beam Width Max.: 6 – 10 in.
Flange Thickness Max.: 5/8 & 3/4 in.
Weight: 15 – 21 lbs