TimeSavers has a large selection of security and safety enclosures for nearly any application. Protect your personnel and equipment from accidental harm with products from manufacturers such as Wirecrafters, Troax, Ford Logan, and Heartland Engineered Products. This includes Wire Cages, Weapons and Evidence Lockers, Tool Cribs, Wire Partitions, Machine Guarding and much more.
We are a major authorized distributor for over a hundred material handling manufacturers. To get more information on our entire security and safety solutions, as well as find the exact solution you are looking for, please contact us directly.
Tool Cribs & Equipment Cages
Build tool cribs of any size and configuration. Unlike chain link fence or other alternatives, wire partitions are fully framed wire mesh panels that bolt together section by section. Most maintenance departments can install this modular partitioning product without the use of special tools or equipment; allowing for an easy installation of tool cribs and security cages.
Using wire partition panels, you may construct tool crib walls and ceilings from the same modular sized panels. The partition panels may be stacked to your desired tool crib wall height, and the panels easily bolt to posts using standard hand tools. A full line of hinged, double hinged, and sliding doors are available for tool crib use, and the open but secure design allows free circulation of light, HVAC, and fire suppression systems throughout the secured areas.
Tool Cribs for Organization
Wire partitions are ideal for the construction of tool cribs. With a designated, secure area to store tools and equipment, you no longer worry about who has what tool, or where tools have been misplaced. When a maintenance person needs a tool to work on equipment in the plant, they go to the tool crib and sign out the tool they need. Many tool cribs also have a service window so the plant personnel do not have to enter into the actual tool crib.
With a designated, secure area to store tools and equipment, you no longer worry about who has what tool, or where tools have been misplaced.
Security Cages
Wire partitions can be used for securing all types of equipment, inventory, and products within a facility. Secure storage cribs for inventory, janitorial supplies, and your most valuable items can be constructed with wire partitions. Proximity readers, card readers, and keypads can be added to the wire partition doors for high security and controlled access.
Tool Crib Construction
Wire partition panels come 1′ wide up to 10′ wide in one foot increments. The panels are 4′ and 5′ high and are stacked one on top of the other to build a tool crib either 8′, 10′, or 12′ high, and can have a variety of doors. Security cages can also be equipped with ceilings, and ceiling and wall panels can be interchanged. Tool cribs and security cages can be designed in custom sizes and configurations.
Features:
- Twenty standard sized panels 4′-0″ or 5′-0″ high, by 1′-0″ to 10′-0″ wide.
- Stack two or more panels between posts to reach wall height.
- Standard size panels work in ceilings and walls.
- Custom size panels and special heights available.
- Hinged, double hinged, sliding, and vertical rise doors available.
- Sliding doors have patented tamper resistant latch mechanism.
- Angle frame design gives installer clear access to hardware, speeding installation.
- Assembly hardware is inaccessible from the secured side of the partition.
- Standard 3/8″ mounting hardware is the heaviest in the industry.
- Heavy duty options available.
- Panels may be ordered with any mesh, expanded metal, sheet metal, or clear Lexan.
Mesh Partitions
Mesh partitions are a very cost-effective solution for providing a high level of protection in warehouses and storage spaces in industry and logistics. Warehouse and industrial partitions are available in various levels of protection and also as solid sheet metal partitions.
Mesh partitions are flexible, simple to install and very strong, with fully welded mesh contained within a strong steel framework.
Can vary in height from 800 mm up to the height of your ceiling. Can be installed as a free-standing unit or anchored to the walls in any type of space or premises.
Partitions can be disassembled, moved or expanded using normal tools.
Machine Guarding Systems are a simple, effective way to keep personnel safe from the dangers posed by automated equipment. These barriers are a strong and economical solution to plant safety needs. Versatility of this system allows easy integration of access doors or larger openings with system controls.
Machine Guarding also doubles as a safety net by containing malfunctioning equipment. Welded and woven wire mesh is extremely resilient; it resists dings, retains its shape, and is virtually maintenance free.
These fully-framed woven wire or welded wire mesh panels bolt to posts forming a strong, secure barrier around dangerous automated equipment. Unlike high-tech light curtains and switch mats that are subject to electrical malfunctions, these safety systems are always on guard.
Woven + Welded Wire Mesh Machine Guarding
Machine guarding and perimeter guarding systems are available in both woven and welded wire mesh. Available in 5′, 8′, 10′ and 12′ or any height you require.
The traditional woven wire mesh machine guarding systems are constructed of a 10 GA wire, woven into a 2″ x 1″ rectangular mesh. This heavy mesh is welded inside a 1-1/4″ x 1-1/4″ x 1/8″ angle frame.
Also available is a wire machine guarding system featuring a 10 GA welded wire design and constructed in a 1 1/4″ x 2 1/2″ rectangular pattern. The sturdy welded mesh is surrounded by a 13 GA rolled formed angle frame. Also available in a 2″x2″ welded mesh square pattern.
Applications:
Commonly found in weld cells, robotic cells, press break equipment stations, laser cutting operation areas, metal stamping areas, and punching stations.
Features:
- Standard height of 5′-3 1/4″ with 0′-3 1/4″ sweep & 8′-5 1/4″ with 0′-3 1/4″ sweep.
- Custom size panels and special heights available.
- Fully framed panel adds strength and stability unequaled in the industry.
- Hinged, double hinged, sliding and vertical rise doors available.
- Angle frame design gives installer clear access to hardware, speeding installation.
- Assembly hardware is inaccessible from the secured side of the guarding.
- All hardware including anchors included.
- Standard 3/8″ mounting hardware is the heaviest in the industry.
- Panels may be ordered in alternate woven and welded mesh options, expanded metal, sheet metal, or clear polycarbonate.
- Safety Interlocks available with mounting plates.
Keep your goods and personnel safe from accidental handling by implementing a Pallet Rack Backing System. Pallet rack backing is made from fully welded mesh and steel frames, which absorb impacts with an energy of up to 2500 joules. The panels are available in three models with different levels of protection. Pallet rack backing panels are easy to mount using our sturdy brackets that fit the majority of pallet racks.
Mesh Panels
The mesh panel is the basis of the pallet rack backing. The panels have a very durable construction with a welded frame and mesh. There are three different mesh sizes available in order to suit different types of goods in your stock. The anti-collapse system can be combined with many sizes of pallet rack. Choose between panels from 700 to 1500 mm wide, with a height of either 1100 or 2200 mm.
Pallet Rack Enclosure Specifications & Details
Made of 10 gauge wire welded in a 2″ x 2″ square mesh. The wire mesh is then welded into a 13 gauge rolled formed angle frame. Pallet rack enclosure end panels are attached to the pallet rack end with flush mount angle clips. To separate multiple bays, end panels are manufactured with a flat frame which allows the panels to be attached to the pallet rack end with self tapping screws. Back panels are also attached directly to the rack with angle clips. Mounting clips allow your pallet load to overhang but still maintain inventory security and safety for workers. Offset clips come in lengths up to 12″ long which allows you to mount panels between back-to-back rows of pallet racks, providing a strong and secure wall to two rows of rack simultaneously.
Features:
- Standard sized panels 4′-0″ or 5′-0″ high, match beam length in width.
- Panels made of 2″ x 2″ x 10 gauge welded wire mesh-other meshes available.
- Panels are framed in 1 1/4″ x 1 1/4″ x 13 gauge steel angle.
- Panels attach directly to rack with mounting brackets.
- Multiple mounting points (seven) on ends of each panel.
- Stack panels one on top of the other to reach desired height.
- Access racks via double sliding doors, or double hinged doors.
- “Above the Top” mounting allows panels to extend above top rack beam.
- Welded wire construction allows for field modifications that look factory-finished.
- Panels can be mounted to support posts if stand alone system desired.
- Heavier options available.
Guard Rail
Guard Rail, Safety Barriers, and Forklift Guardrails are tested to withstand 10,000 lbs. at 4 mph. 18″ or 43″ tall posts with hardware included.
- Powder coated yellow for maximum visibility and durability
- Columns are 4.75″ × 4.75″ steel square tube mounted on a 10″ × 10″ base plate
- Designed for faster installation to cut down on labor costs.
- Universal 4 way mounting posts eliminate need for “end” or “line” posts
- All anchors and hardware/caps included
Install guard rails in your plant to protect people, machinery, and property from accidents involving forklifts, sweepers, or other moving facility equipment.
Guard Rails protective railing system helps to prevent damage to equipment or facilities by providing a strong barrier along aisle ways or in front of expensive or critical equipment.
Guardrail Styles & Sizes
Available in two styles; Single or Double Rail. The single guard rail columns are 17″ high, where double guard rail columns are 43″ high. All guard rail columns are 4″ square x 1/4″ wall structural steel tubing with metal caps, and 10″ square x 1/2″ thick steel base plates. The base plates have four 7/8″ round anchor holes, and the floor anchors are provided. Custom guard rail heights are available. All guard rail columns are powder coat painted safety yellow.
Rail Lengths
The 11 gauge formed steel rails come in standard lengths (0′-8″, 1′-8″, 2′-8″, 3′-8″, 4′-8″, 5′-8″, 6′-8″, 7′-8″, 8′-8″, and 9′-8″) to reach even foot increments center to center of each column. Custom guard rail lengths are also available. Rails mount to the columns with 1/2″ x 5″ through bolts. All rails are powder coat painted safety yellow.
Quick & Easy Installation
Guard rail components bolt together and column base plates are anchored to the floor. All necessary hardware is included with your order.
Guardrail Options
Additional options available include rail lift-out kits, offset column base plates, and corner offset columns.
Features:
- Rated to withstand impact of 10,000 lb load at 4 miles per hour.
- Quick Installation – components bolt together.
- All assembly hardware, including floor anchors, is included with your order.
- Two styles, single and double rail.
- Combined rails and columns sized to layout on one foot centers.
- Optional lift out sections, and offset column base plates available.
Hand Rail
This square steel railing system sets up with standard hand tools; no welding, no cutting, no self tapping screws.
Commonly found in shipping areas to keep employees safe around dock height doors. Aisleways can be formed with this heavy industrial steel handrail to separate fork trucks from employees walking through an active area of a production or warehouse floor.
For those railing systems used at a second level or on a mezzanine, a 4″ high kick plate can be added to the hand rail system to keep small items from falling off the enclosed area.
Features:
- Bolt up rail system.
- Top rail set at 42″ from floor level.
- Mid rail centered at 20″ from floor.
- Rails and posts made of 14 gauge steel tube.
- Combined rail and post layout on 8′, 4′, and 2′ centers.
- Standard rails can be field cut for custom lengths.
- Optional 4″ kick plate available.
- Rails bolt to posts with factory threaded inserts.
- Posts welded to baseplate for floor anchoring.
- Can be mounted to floor, or to face side of mezzanine.
